3D Offset finishing is available only with the 3-Axis Plus option. Click NC > 3 Axis > 3D Offset. The 3D Offset operation allows 2D or 3D boundaries, and creates concentric, offset cutting passes. The shape of the cutting passes matches the shape of the outer contour of the part. The 3D Offset operation measures the step Increment three dimensionally on the selected surfaces.
Some of the benefits of 3D Offset finishing are as follows.
• The toolpath maintains a constant scallop height, for a consistent finish.
• The tool can climb cut or conventional cut throughout the toolpath.
• Steady tool engagement accommodates maximum speeds and feeds.
• Cut from the outside in, or from the inside out.
