SELECT/h (M)
This statement generates a fixture offset code to initiate the X-Y fixture offsets, with the offset register number h. The address is selected by the Configuration Tool.
SELECT/AUTO (M)
(5 axis rotary head - rotary table machine)
A head rotation range that will position on either side of the vertical axis presents two possible machine positions that will satisfy the geometry of a given location. The following vocabulary is provided so the programmer can control which condition is satisfied.
This statement allows the A-axis to position between the front and rear positions.
SELECT/BOTH,START[,FRONT-REAR] (M)
(5 axis rotary head - rotary table machine)
A head rotation range that will position on either side of the vertical axis presents two possible machine positions that will satisfy the geometry of a given location. The following vocabulary is provided so the programmer can control which condition is satisfied.
This statement allows the A-axis to position to the front or the rear position initially and then change to the opposite condition for the remainder of the .INC and CL points.
SELECT/FRONT (M)
(5 axis rotary head - rotary table machine)
A head rotation range that will position on either side of the vertical axis presents two possible machine positions that will satisfy the geometry of a given location. The following vocabulary is provided so the programmer can control which condition is satisfied.
This is the default modal head condition which confines the A-axis to the front position (1st and 4th quadrants).
SELECT/REAR (M)
(5 axis rotary head - rotary table machine)
A head rotation range that will position on either side of the vertical axis presents two possible machine positions that will satisfy the geometry of a given location. The following vocabulary is provided so the programmer can control which condition is satisfied.
This statement confines the A-axis to the rear position (2nd and 3rd quadrants).
SPSTCMND.chm