LOADTL/t[.LENGTH,l][ADJUST,h][,OMIT]
This command generates a tool change block consisting of an M-code, a tool number T-code, and an offset code.
t The tool number desired.
LENGTH,l Specifies the tool length, which is used to adjust Z axis output. If you omit LENGTH,l, zero tool length is assumed.
ADJUST,h Generates the offset register number h in the address designated in the Configuration Tool
OMIT Does not generate an M-code. You can use this option if the tool is already resident in the spindle, such as the first LOADTL statement to indicate tool length.
SPSTCMND.chm