DELAY/n[,REV]
This statement produces a dwell block. The value of n is in seconds or in revolutions if REV is given.
If in IPR mode, the dwell time is output in revolutions.
If in IPM mode, the dwell time is output in seconds.
When the IPM/IPR switchable option is not available in the control, the dwell time will be converted to the available units.
The dwell time in seconds will be printed for verification.
Note: If the dwell register is one of the axes registers, the verification dwell time will appear in that axis column.
Examples (L):
Input: IPM Mode
FEDRAT/10,IPM
GOTO/0,0
DELAY/5 $$OUTPUTS DWELL CODE & DWELL IN SECONDS
GOTO/5,5
Machine Data File Output:
N005G01X0Z0F01$
N006G04X05$
N007G01X05Z05$
Example (L):
Input: IPR Mode
FEDRAT/.010,IPR
GOTO/0,0
DELAY/5 $$OUTPUTS DWELL CODE & DWELL IN REVS
GOTO/0,0
Machine Data File Output:
N005G95$
N006G01X0Z0F001$
N007G04X5425
N008G01X0Z0$
Examples (M):
Input:
SPINDL/1000,RPM,CLW
FEDRAT/10,IPM
GOTO/0,0
DELAY/5 $$OUTPUTS DWELL CODE & DWELL IN SECONDS
GOTO/5,5
Machine Data File Output:
N0004M4A$
N0005S1000M03$
N0006G01X0Y0Z0F01$
N0007G04F005$
N0008G01X005Y005F01$
Example (M):
Input:
SPINDL/1000,RPM,CLW
FEDRAT/.010,IPR
GOTO/0,0
DELAY/5,REV $$DWELL CODE IN REVS (.3 SEC.)
GOTO/5,5
Machine Data File Output:
N004M41$
N005S100M03$
N006G01X0Z0F01$
N007G04F0003$
N008G01X005Y005F01$
SPSTCMND.chm