CYCLE DEEPCL (M)

Your Ad Here




 

(Hardware Cycle)

CYCLE/DEEPCL,z,f,IPM-IPR,c[,START,s][,DECR,d][,LAST,l] [,DIAMTR,dia]

  1. Rapid to clearance c.

  2. Advance at feedrate f the incremental distance of s*dia

  3. Retract at rapid rate to clearance c.

  4. Advance at rapid rate to feed depth less c.

  5. Decrement the value of s by the value of d.

Repeat steps 2, 3, 4, and 5 until the value of s equals the value of l. Then repeat steps 2, 3, and 4 until final depth is reached. Cycle will always end when final depth is reached, regardless of any other parameter value.

 

The following is a list of the default values for this cycle. You need enter only those values that are to be changed.

START,s Default is 2.5

DECR,d Default is .5

LAST,l Default is 1.0

DIAMTR,dia Default is the programmed cutter diameter

 

Example:

Input:

 

CUTTER/.5

CYCLE/DEEPCL,5,10,IPM,.1

GOTO/0,0,10

CYCLE/OFF

 

Machine Data File Output:

 

N0001G81X0Y0R010Z00875F01$

N0002G80$

N0003G81R00885Z00775$

N0004G80R0101$

N0005G81R00785Z007$

N0006G80R0101$

N0007G81R0071Z0065$

N0008G80R010$

N0009G81R0066Z006$

N0010G80R0101$

N0011G81R0061Z0055$

N0012G80R0101$

N0013G81R0056Z005$

N0014G80R0101$

 

SPSTCMND.chm

Return to SURFCAM Index


Your Ad Here