(Software Cycle)
CYCLE/CSINK,d,a,f,IPM IPR MMPR MMPM,c[,LOCK,i]
Rapid to clearance c.
Advance at feedrate f to depth z.
Depth z is calculated from the required diameter d and included angle a.
Dwell.
Retract at rapid rate to clearance c.
LOCK,i specifies the dwell time. Initially a value of 2 seconds is assumed.
Example:
Input:
$$ DIAMETER = .5, ANGLE = 90
CYCLE/CSINK,0.5,90.0,10.0,IPM,.1
GOTO/0,0
Machine Data File Output:
N5G00X0.0Z.1$
N6G01Z .25F10.$ $$ (Calculated Z depth)
N7G04X2.0$
N8G00X0.0Z.1$
SPSTCMND.chm