CYCLE BORE (L)

(Software Cycle)

CYCLE/BORE,z,f,IPM IPR MMPR MMPM,c[,LOCK,i]

1. Advance at rapid rate to clearance c.

2. Advance at feedrate f to depth z.

3. Output spindle stop M code with dwell.

4. Retract at rapid rate to clearance c.

5. Output original spindle direction M code.

LOCK,i  Specifies the dwell time for spindle stop. Initially a value of 2 seconds is assumed.

Example:

Input:

$$ Z DEPTH=1.0,FEED=7.5,IPM CLEARANCE=.1

CYCLE/BORE,1.0,7.5,IPM,.1

GOTO/0,0

SPSTCMND.chm