ARCSLP/ON,d
All circular motion following this statement will be output as helical arc blocks, if helical interpolation is available.
d Specifies the linear lead for the third axis. The sign of d determines positive or negative motion of this axis in the part coordinate system.
ARCSLP/OFF
Turns off the option.
Example:
Input:
FROM/-1,-4
ARCSLP/ON,(1/8)
GO/C1
TLLFT,GOLFT/C1,ON,3,INTOF,L1
ARCSLP/OFF
GOTO/P1
Machine Data File Output:
N6G1X-7.579Y-3.0317Z.0F10.$
N7G2X-3.125Y.0Z.264I.579J3.031K.199$
N8X.0Y3.125Z.576I3.125J.0$
N9X3.125Y.0Z.888I.0J3.125$
N10X.0Y-3.125Z1.2I3.125J0$
N11X-3.125Y.0Z1.512I.0J3.125$
N12X.0Y3.125Z1.824I3.125J.0$
N13G1Y-4.Z.0$
SPSTCMND.chm