Create cutting operations. To learn how to create cutting operations, click the Contents tab at the left. In the Contents click SURFCAM Menus > NC Menu.
Use the buttons on the Main toolbar to position your part model. See Main Toolbar 1 buttons, and Hot Keys.
Click the down arrow next to the Toolpath
Verification button to select the whole Project,
or the Setup or the operation to verify.
Click the Toolpath Verification
button. The following buttons appear in the dynamic toolbar area.
The Toolpath Verification button 
also appears in the Operations
Manager toolbar. Inside the Operations Manager, select the Project
or the operations or setup to verify, then select the Toolpath
Verification button.
To exit the verification, Click the Toolpath Verification
button again.
, 
