Offset Corner Angle (Degrees)
If this value exceeds the angle of a corner on the selected geometry, the Extend Outside Corners Using option applies to that corner.
Maximum Deviation Error From Spline
Maximum chordal deviation from the spline (or other entity being offset) allowable in the offset.
Extend Outside Corners Using
This option applies to corners on the selected geometry whose angle exceeds the Offset Corner Angle value. The Arcs option, creates a radius on the offset corner. The Lines option creates a sharp corner.
Example,
Offset Corner Angle and Extend Outside
Corners Using
The angle of the original geometry in this example is 30 degrees.
|
Offset Corner Angle > 30 |
Offset Corner Angle > 30 |
Offset Corner Angle < 30 |
Offset Corner Angle < 30 |
|
|
|
|
|
