The Finish Floor cut removes the material left by the Rough cut from the Stock to Leave value.
The Finish Floor parameter has a checkbox and a button .
If Stock to Leave is set to 0, the Finish Floor checkbox is not available. All Finish Floor passes follow the centerline of the groove.
If the cutting tool is a dovetail cutter, the Finish Floor check box is not available.
If you mark the Finish Floor box, the toolpath creates one or more finish passes on the floor. Click the Finish Floor button to see the Finish Floor Details dialog box.
Make One Pass That Leaves
Check the box to leave some stock. You can edit the default 0.005 value.
Make One Pass at Net
Check the box if you do not want to leave stock.
