This menu appears when SURFCAM asks you to select a point.
Sketch
After you select Sketch, right click in the work area to turn the Snap Grid ON or OFF.
See Sketch.
Point
Locate a position at the XYZ-coordinate of a point that already exists.
End Point
Locate a position at the XYZ-coordinate of an endpoint on the element you select. SURFCAM will select the endpoint nearest the position you clicked.
Center
Locate the center of an arc, the center of a circle, or the midpoint of a line.
See picture.
Midpoint
Locate the midpoint of an arc or a line.
See picture.
Intersect
Locate a position at the XYZ coordinate of the element selected and its intersection with another element.
Locate a position that is a relative distance from a known location which you select.
Keyboard
The World dialog box will be displayed. Enter any X, Y, and Z coordinates in 3D space. This location is based on World or View coordinates as set in the Status menu.
Quadrant
Select one of four points on a circle. These points are 90° apart starting at the 3 o'clock position. To select one of these four points, click any point of the circle that is within 45° of the point you want. You can also select any of the same four points associated with an arc if they are within 45° of an end point of the arc.
