(Run) button in the top toolbar. If you do not see this button, use the Solution > Run menu item. You could also show the Solution toolbar by selecting Tools > Toolbars > Solution and then clicking the toolbar button.
To run the simulation, click on the (Run) button in the top toolbar. If you do not see this button, use the Solution > Run menu item. You could also show the Solution toolbar by selecting Tools > Toolbars > Solution and then clicking the toolbar button.
The Residuals display will be created automatically and will show the progress being made by the solver. The two monitor plots created in the Monitoring the Run Progress section and the vector scene should also be displayed. The tabs at the top of the Graphics window make it possible to select any one of the active displays for viewing. They can also be rearranged and multiple scenes can even be shown simultaneously, by dragging the tabs around the edges of the Graphics window.
During the run, it is possible to stop the process by clicking on the 
(Stop) button in the toolbar. If you do halt the simulation, it can be continued later by clicking on the (Run) button. If left alone, the simulation will continue until the stopping criterion is satisfied.
The Residuals display at the end of the calculation should look as shown below.
Save the simulation after the run has finished.