Click Window, and select the part document window.
In the
FeatureManager design tree, expand Cut
list(31) 
.
Right-click Cut list(31) and select Update.
You can display a cut list on the drawing sheet.
The cut list:
Groups identical items, such as the four gussets or the two I-beam members
Isolates items that do not belong on a cut list, such as the eight fillet beads
Click Window, and select the part document window.
In the
FeatureManager design tree, expand Cut
list(31) .
Right-click Cut list(31) and select Update.
Identical
items are grouped together in Cut-List-Item
folders, and the cut list icon changes from to 
.
Under Cut List(31), select each cut list item to highlight the entities in the graphics area.
Cut-List-Item1(8): sub-folder with Sub-weldment1(8) created earlier
Cut-List-Item2(4): four mitered members of the front frame
Cut-List-Item3(1): one rectangular cross member
Cut-List-Item4(4): four side segments of the box
Cut-List-Item5(4): four gussets
Cut-List-Item6(2): two I-beam segments
Fillet Bead1[1] through Fillet Bead4[2] are listed separately.
Save the model.
