Under Settings,
select Apply corner treatment
and click End Miter 
.
Click 
.
Under Settings,
select Apply corner treatment
and click End Miter .
Click .
The structural member appears in the graphics area and Path segments is cleared for the next structural member.
Expand the flyout FeatureManager design tree:
Structural Member1 appears.
Cut
list(4)
is added.
Expand Cut list(4) to see the four segments of Structural member1 listed.
Use Zoom
to Area 
on
the View toolbar to see the mitered corners.
The sample part in this lesson creates structural
members along straight segments only. However, you can also create structural members along curved segments.
