If a wire to which terminals
are assigned is deleted, then the terminals assigned to that wire are
unassigned.The Edit Terminals PropertyManager allows you to specify the number of terminals in the harness drawing.
Library name. Select a terminal part number from the list.
Assigned. Read-only. Number of terminals of this part number that are assigned to wire end points in the harness. See Harnessing Terminal Assignment.
If a wire to which terminals
are assigned is deleted, then the terminals assigned to that wire are
unassigned.
Unassigned. Read-only. Number of terminals of this part number that are included in the Harness Bill of Materials, but are not assigned to wire end points. You add unassigned terminals in this PropertyManager, then assign the terminals in the Edit Wires PropertyManager.
Terminate All Wires. Click to automatically add a terminal to every wire end point that does not have a terminal assigned. The wires, terminals, and connectors must have specific properties in order to terminate automatically. See Harnessing Terminal Assignment.
Number to insert or delete. Set a value for the quantity of terminals to add to or subtract from Unassigned, then click Insert or Delete.
Read-only. Displays the library properties of the terminal. You can edit the library properties in the harness library.