You can repeat steps b and
c to add more than one covering to a bundle segment.Covering objects can be added to bundle segments in the harness drawing. Add coverings to one segment at a time. The length of the segment is used to calculate the amount of covering for the Harness Bill of Materials. Each covering item you add is given a unique name to identify it for highlighting or editing.
Requirements:
Covering objects must exist in the harness library.
If you want the segment to change to a specific color when you add a covering, the covering library object must have a library property named color (not case-sensitive) and a valid value. Available covering color values are black, gray, red, yellow, brown, gold, orange, and blue (not case-sensitive). If no color property exists for the covering library object, the bundle segment color is set to the default color. (The default color is set in Tools, Options, System Options, Colors for Sketch, Under Defined.)
If you want to change the line style of the segment, the covering library object must have a library property named linestyle. Available linestyle values are chain, chainthick, and stitch. If no linestyle property exists for the covering library object, the bundle segment line style is set to the default (continuous).
See Creating a Harness Library.
To add covering to a harness segment:
In the harness drawing document, click Routing, Electrical, Harness, Edit, Covering.
In the graphics area, select a bundle segment.
In the PropertyManager, under Properties:
Type a name for the bundle segment in Name (example LeftTrunkTape).
Select the name of a covering library object in Library name.
Click Create/Edit.
You can repeat steps b and
c to add more than one covering to a bundle segment.
A covering instance appears under Covering. If the covering library object you select has a color or linestyle property, the segment appearance updates accordingly.
Repeat steps 2 and 3
to add coverings to other segments, then click 
.
If you want to add a covering to only a portion of a segment,
use Split
Segment to replace one segment with two shorter segments, then
apply the covering to the desired shorter segment.
To change a covering:
In the harness drawing document, click Routing, Electrical, Harness, Edit, Covering.
In the PropertyManager, under Covering, select a name.
Under Properties, select the name of a covering library object in Library name, then click Create/Edit.
The covering instance updates to use the new library object.
To delete a covering from the harness:
In the harness drawing document, click Routing, Electrical, Harness, Edit, Covering.
In the PropertyManager, under Covering, select a name, then click Delete.
The covering instance is removed from the segment and from the Harness Bill of Materials.