You can cut, copy, and paste drawing views from one sheet to another in the same drawing, and from one drawing document to another.
You can also drag views from sheet to sheet within a drawing (but not to another drawing document).
To perform these operations on multiple views at once, hold down the Ctrl key as you select the views.
NOTE: To copy a Detail or Section View from one drawing to another, you must also copy the parent view. You can either copy the parent view first, or you can copy both the parent and the Detail or Section View at the same time.
To cut/copy/paste a drawing view:
Select the view either on the sheet or in the FeatureManager design tree.
Click Cut
or Copy 
on the Standard toolbar, or click Edit, Cut or Copy.
Change to the target sheet or drawing document,
click where you want to paste the view, and click Paste
on the Standard toolbar or click Edit, Paste.
To move or copy views by dragging:
In the FeatureManager design tree:
To
move the view, drag the drawing view icon and drop it on the target sheet
icon (the pointer changes to 
when it is over the sheet
icon).
To
copy the view, hold down Ctrl,
then drag the drawing view icon and drop it on the target sheet icon (the
pointer changes to 
when it is over the sheet icon).