Form Tool PropertyManager

You can create forming tools and add them to sheet metal parts. When you create a forming tool:

• The locating sketch is added to position the forming tool on the sheet metal part

• The colors are applied to distinguish the Stopping Face from the Faces to Remove

To create forming tools:

1. Create and save the part.

   No base is required to create forming tools.

2. Click Forming Tool (Sheet Metal toolbar) or Insert, Sheet Metal, Forming Tool.

3. In the PropertyManager:

1. Select a face as the Stopping Face.

2. Select one or more faces as the Faces to Remove.

   Stopping Face	Faces to Remove

4. Click .

Return SolidWorks Help Index