(Dimensions/Relations toolbar) or Tools, Relations,
Display/Delete.The Display/Delete
Relations PropertyManager appears when you click Display/Delete
Relations (Dimensions/Relations toolbar) or Tools, Relations,
Display/Delete.
When you select a relation from the list, the appropriate sketch entities are highlighted in the graphics area, along with the icons representing that relation. If Sketch Relations (View, Sketch Relations) is selected, all icons are displayed, but the icons for the highlighted relation appear in a different color.
Filter. Specifies which relations to display:
All in this sketch
Selected Entities. Displays the names of entities you select in the sketch.
Relations
. Displays existing relations based on the selected Filter. When you select a relation from
the list, the names of the related entities are displayed under Entities and the sketch entity is highlighted
in the graphics area.
The status of external references
is displayed the same as in the FeatureManager design tree.
Information
. Displays the status
of the selected sketch entity. If the relation was created within the
context of an assembly, the status can be Broken or Locked.
Suppressed. Suppresses the relation for the current configuration. The name of the relation turns gray and the Information status changes (from Satisfied to Driven, for example).
Undo
last relation change 
. Deletes or replaces
the last action.
Delete and Delete All. Deletes the selected relations or deletes all the relations.
Entities used in the selected relation:
Entity. Lists each selected sketch entity in Relations.
Status. Displays the status of the selected sketch entity, such as Fully Defined, Under Defined, and so on.
Defined In. Displays the location where the entity is defined, such as Current Sketch, Same Model, or External Model.
Information for external entities in assemblies:
Entity. Displays the entity name for sketch entities in the Same Model or External Model.
Owner. Displays the part to which the sketch entity belongs
Owner and Assembly. Displays the name of the top-level assembly where the relation was created for sketch entities in an External Model.
Replace. Replaces the selected entity with another entity. In the graphics area, select an entity for Entity to replace the one selected above, and click Replace. If the replacement is not appropriate, the status is Invalid.
Undo last relation change . Undoes the last Replace
action.
For models with multiple configurations, you can apply the selected relations to This configuration, All configurations, or Specify configurations. If you select Specify configurations, select configurations in the Configurations list. Click All to select all the configurations in the list. Click Reset to reset the selections to the original settings.
Select Show PropertyManager when the sketch becomes over defined or unsolvable to display the appropriate PropertyManager, such as Circle, so you can edit the sketch.
If the sketch
is over defined you can also use SketchXpert
to diagnose the problem and display different solutions.