Select Mirror Entities 
to mirror pre-existing sketch entities, and then select the
entity about which to mirror. If you want to first select the entity about
which to mirror, and then sketch the entities to mirror, select Dynamic
Mirror Entities 
. You
can mirror sketches about any these entities:
Centerlines
Lines
Linear model edges
Linear edges on drawings
To mirror about a linear drawing edge, the
sketch entities to mirror must lie within the boundary
of the drawing.
As you select the sketch entities to mirror, Mirror Entities provides the following options:
Select some or all entities to mirror.
Include both the original and the mirrored entities, or only the mirrored entities.
|
|
|
|
Select the pre-existing |
Selected entities mirrored. |
Under Options, in the PropertyManager select:
Entities to mirror
. Select some or all entities to mirror.
Copy. Select Copy to include both the original and mirrored entities. Clear Copy to include only the mirrored entities.
Mirror about
. Select any line, the linear edge on a model, or the
linear edge on a drawing about which to mirror.
