Many
of the properties are available both above and below the weld symbol line
and are described in order from the line. A preview of the symbol is displayed
in the graphics area.You can create ANSI weld symbols in part, assembly, and drawing documents. The Dimensioning standard in Tools, Options, Document Properties, Detailing must be set to ANSI.
Many
of the properties are available both above and below the weld symbol line
and are described in order from the line. A preview of the symbol is displayed
in the graphics area.
Around. Adds 
to
indicate that the weld is applied all around the contour.
Field/Site. Adds 
to indicate that the weld is applied in the field or on-site.
Weld Symbol. Click and select a symbol from a symbol library. Other options become available, depending on the symbol chosen. Type dimensions to the left and right of the symbol.
Specification process. Type
text in the box, in any number of lines, to appear in the tail of the
symbol. 
Contour. Select None, Flat, Convex, or Concave.
Finishing method. Select None, Chipping, Grinding, Hammering, Machining, Rolling, or Unspecified.
Stagger weld. Fillet weld symbols
above and below the line are staggered. 
2nd fillet. Type dimensions.
Root opening. Type a dimension. Arrow. Offset text.
Groove angle. Type an angle in degrees. Inside. Text placed inside the weld symbol.
Joint with. Choose None or one of the types (Double V Groove Spacer and so on).
Font. To specify a font for text and size of symbols, clear Use document font and click Font.
Leader anchor. Anchor the leader to the specified location on the weld symbol.
Use multi jog leader. Allows you to click in the graphics area several times to create bends for the leader.
Layer. In a drawing with named layers, select a layer from the list.