Single Center Mark.
Insert a center mark into a single circle or arc. You can change the Display Attributes and rotation Angle of the center mark.You can control the following properties for center marks in the Center Mark PropertyManager. The properties available vary depending on the type of center mark selected.
Single Center Mark.
Insert a center mark into a single circle or arc. You can change the Display Attributes and rotation Angle of the center mark.
Linear Center Mark.
Insert center marks into a linear pattern of circles or arcs. You can
select Connection lines and Display Attributes for linear patterns.
Circular Center Mark.
Insert center marks into a circular pattern of circles or arcs. You can
select Circular lines, Radial
lines, Base center mark,
and Display Attributes for circular
patterns.
Clear Use document defaults to change the following attributes set in Tools, Options, Document Properties, Detailing:
Mark size. Enter a value.
Extended lines. Display extended axis lines, with a gap between the center mark and the extended lines.
Centerline font. Display the center mark lines in the centerline font.
Displays the current angle of a single center mark. If the center mark is rotated because the view is rotated, the rotation angle appears here. Enter a new value if desired. Not available for linear or circular pattern center marks.
In drawings with named layers, select a layer.