DimXpert
DimXpert applies dimensions in drawings so that manufacturing features
(patterns, slots, pockets, etc.) are fully-defined. The DimXpert tool
is accessible in the Dimension PropertyManager.
You select a feature’s edge to dimension, then DimXpert applies all associated
dimensions in that drawing view for the feature.
DimXpert differs from Autodimension
because DimXpert:
Recognizes patterns (linear and polar dimensions
with instance counts) and countersink holes.
Produces predictable results. For example, when
you select an edge in DimXpert, only the feature represented by the edge
is dimensioned. With autodimensioning, you may get unwanted dimensions
to several features.
To apply dimensions using DimXpert:
In a drawing, click Smart
Dimension  or Tools,
Dimensions, Smart. In the PropertyManager, click DimXpert
 . Set options in the Dimension
PropertyManager. |
In the PropertyManager, if you selected:
By Vertex,
select a vertex in the drawing view. By Selection,
select an edge for the X and Y values.
In the graphics area, select a manufacturing feature
to dimension.
|
Vertex and manufacturing feature (hole pattern hole) |
Repeat step 5 for other manufacturing features
as necessary. Click  . |
Both hole patterns and the center hole are dimensioned |
Related Topics
Smart Dimensioning
Inserting Model
Items
Return SolidWorks Help Index