Corner Trim

A Corner Trim tool was added to the Sheet Metal toolbar. The Corner Trim tool is available only with flattened parts.

Options	Examples
Collect all corners. Selects all inside corners.
Centered on bend lines. Adds corner cuts that are centered relative to the bend lines. This is available only with Relief set to Circular or Square.
	Cleared	Selected
Tangent to bend. Creates corner cuts that are tangent to the bend lines (available only with Centered on bend lines selected).
Cleared. Modify the Distance option to set the size of the cut.	Selected. The system sets the distance to create a cut that is tangent to the bend lines.
Add filleted corners. Creates a fillet of a specified radius on the inside corners.