Completing the Part

The final step is to create a cut to hold a candle.

1. Select the top face of the revolved base feature, then click Extruded Cut on the Features toolbar.

2. Click Normal To on the Standard Views toolbar.

3. Click Circle on the Sketch toolbar, and select the sketch origin. Sketch and dimension a circle as shown.

   

4. Click Exit Sketch on the Sketch toolbar.

5. In the PropertyManager, under Direction 1:

• Select Blind in End Condition.

• Set Depth to 25.

• Click Draft On/Off , and set Draft Angle to 15.

6. Click OK .

7. To see the angled cut, click Hidden Lines Visible on the View toolbar, and rotate the part using the arrow keys.

Congratulations! You have completed this lesson.

Return SolidWorks Help Index