Why did I use an image mask?Under Mask Image, select Image mask file, browse to <install_dir>\samples\tutorial\photowks\tutorial \lg_redMask.bmp, and click Open.
The preview image is hard to see because the decal is white.
On the Illumination
tab 
:
Select Plastic in Material type.
Type 0.75 for Ambient.
On the Mapping
tab 
:
Verify the cylindrical face of coffee cup is selected.
Under Mapping, select Cylindrical for Mapping type.
Set
About axis 
to 280 and Along
axis 
to -5.
Under Size/Orientation, clear Fixed aspect ratio.
Set Width
to 25 and Height 
to
100.
When you set these values, the decal is rotated and scaled to fit the proportions of the coffee cup.
Click 
, then save and close
the part document.
In the
assembly, click Render Area 
and box select the coffee cup.
