Adding Another Drawing Sheet

Now you create an additional drawing sheet for the assembly. You then use the Browse command to insert an assembly document into the drawing.

1. If the PropertyManager is still open, click OK to close it.

2. Right-click on any open area of the drawing sheet and select Add Sheet.
   
   Another sheet of the same size as Sheet1 is added to the drawing.

3. Click Standard 3 View on the Drawing toolbar.

4. In the PropertyManager, select Tutor.sldasm then click OK .

5. Reposition the views on the sheet as shown below.

You can use Standard 3 View to add all three standard views to a drawing at once, or you can use Model View to add one view at a time. The resulting views are the same.

Next

Return SolidWorks Help Index