Click Dimetric
on the
Standard Views toolbar.
Click Draft
on the Features toolbar.
In the PropertyManager:
You add draft to taper the grip, giving it an aesthetically pleasing design in the finished part.
Click Dimetric
on the
Standard Views toolbar.
Click Draft
on the Features toolbar.
In the PropertyManager:
Select Neutral Plane in Type of Draft. The neutral plane is the plane or face that you choose to determine the pull direction when creating a mold. The Z axis direction of the neutral plane is the direction in which the part ejects from the mold.
Set Draft Angle
to 10
Select the Right plane for Neutral Plane, using the flyout FeatureManager design tree.
In the upper left corner of the graphics
area, click the plus sign 
to expand the design tree.
Select the Right plane.
Click in Faces
to Draft, then select the three faces shown.
Click OK
to create the drafts.
Congratulations! You have finished building the part used in the Fillet Features tutorial. Click here to go to the Fillet Features tutorial.
??