Isovalue.
Sets the value of iso surface to be plotted. Reverse
clipping direction
changes the direction of the cut to the opposite side.
The Iso Clipping PropertyManager allows you to view surfaces of a specified value of the plotted result. You can create up to six surfaces simultaneously.
Isovalue.
Sets the value of iso surface to be plotted. Reverse
clipping direction
changes the direction of the cut to the opposite side.
This section appears after you select Iso 2. Use Iso 2 and Iso 3 to create additional section views in the model.
Plot on iso surface only. If checked, the program displays surfaces with the value specified in the Isovalue box. If not checked, the program displays surfaces with values equal to or larger than the value specified in the Isovalue box.
Show contour on the uncut portion of the model. If checked, the program displays the result contours on the uncut portion of the model. If not checked, the program displays uncut portion of the model in the shaded view mode.
Reset. Resets the selections to the default values.
Clipping on/off
. Turns the clipping of the active plot on/off.