This page of the wizard is used to modify the impact portion of the interactions for the selected material participates.
|
Stiffness |
Specify the stiffness of the boundary interaction between the two parts. It should be set to a number that approximates the material stiffness of the two parts in collision. |
|
Exponent |
Specify the exponent of the force deformation characteristic. The collision is modeled using an exponential force function. |
|
Damping |
Enter the maximum damping coefficient of the boundary interaction. |
|
Penetration |
Enter the boundary penetration distance where full damping occurs. |
|
Coefficient of Restitution |
Enter the coefficient of restitution for the impact. This number must be between 0 and 1. |
|
Finish |
Select to end the wizard and accept all currently defined material and interaction properties. |