Scaling and Linking to File

Scale the piston mechanism and link it to the .sldblk file.

1. In the FeatureManager design tree, select Piston Mechanism-1, right-click and select Edit Block.

2. In the graphics area, drag the piston mechanism so it is adjacent to the central arm.

Piston Mechanism-1 is too small relative to the rest of the model and needs scaling.

3. In the PropertyManager:

1. Under Parameters, set Scale to 1.4.

2. Click Browse, select piston_mechanism.sldblk, and click Open.

3. Under Definition, select Link to File.

4. Click .

Next

Return SolidWorks Help Index