In the FeatureManager design
tree, -1 is added to both blocks,
to indicate they are the first instance of each block in Sketch1.Move and rename blocks.
In the FeatureManager design tree, right-click Block1-1, select Properties, type Crane Base for Name, then click OK.
Repeat for Block2-1, but type Upper Arm for Name.
In the FeatureManager design
tree, -1 is added to both blocks,
to indicate they are the first instance of each block in Sketch1.
With Upper Arm selected, drag the block to approximately the distance shown from Crane Base.
You can select any sketch
entity in a block to drag, rotate, and position an unconstrained block.
