Click Make Blocks
(Blocks toolbar).
Select the horizontal line for Block
Entities, and in the PropertyManager click 
.
Click in the graphics area to clear the selection.
Click Make Blocks
(Blocks toolbar).
Select the horizontal line for Block
Entities, and in the PropertyManager click .
Click in the graphics area to clear the selection.
You have created a block. Note that:
Block1-1 is displayed
in the FeatureManager design tree under Sketch1.
The geometry of the block in the graphics area is displayed in gray.
Repeat steps 1-3 with each line entity.
You can select each entity
in any order.
Click Rebuild
(Standard toolbar).
Four blocks, identified
as Block1-1 through
Block4-1, are displayed in the FeatureManager
design tree under Sketch1.
The geometry in the graphics area for all blocks is displayed in gray.
