Turn + Groove defaults

Rough

Rough type

This command enables you to define the Rough type. It has two options:

• Smooth

• Stairs

Offset type

This command enables you to choose the offset type from:

• XZ_ABS

• XZ

• Distance

Finish on Rough geometry

This option performs a finish cut on the rough geometry to remove steps left after roughing.

Semi-Finish

A semi-finish pass is a single pass that is executed before the finish pass, at an offset from the geometry. This field has three options:

• No

• Turn_Groove_Method

• ISO_Turning_Method

Offset type

This field has three options:

• Distance

• XZ

• XZ_ABS

Finish

This option enables you to choose between:

• No

• ISO_Turning_Method

Step down

This option enables you to choose either Constant or Single Step down and define the value.