Target model definition




The Target model option enables you to define the final part after machining. 

  1. Click on the Target model button in the Turning Part data dialog box.

  2. Click on the Define 3D Model button to start the geometry selection.

  3. Select the geometry with the 3D Geometry dialog box.

  4. Confirm the Default Geometry Name or enter a new name for the geometry.

  5. Confirm the Target model by clicking on the OK button.

 

Name

In this field you can see the target model name and choose the model from the previously defined 3D geometries.

Show 

With this button the Target Model will be shown in the Rest Material window of SolidCAM.

If you want to control the quality of the stock and target models visualization, you can change the target tolerance in the SolidCAM Settings.

  • Click SolidCAM in the SolidWorks menu and choose CAM Settings.

  • In the Units tab, you can change the Target tolerance. The recommended tolerance is 0.1 mm. A smaller tolerance will improve the quality and reduce the visualization speed.

 

Show on model

With this button you can see the selected Target model in the Autodesk Inventor window.

 

Return to SolidCAM Index


Your Ad Here