Drill defaults

Release distance

This field determines the release distance of the drill tool after each step down (see Release Type) during the Pecking cycle.

Release Type

This field defines how the tool retreats from the material after each Step down during the Pecking cycle.

Step down

This field determines the value of each step down of the peck drilling.

Delay

In the Delay field, enter the amount of time (in seconds) you want the tool to pause at the depth point of the hole.

Use chamfer

This field has two options:

• No

The drill end point reaches the Drill End Position defined by the user.

• Yes

The drill end point will go past the Drill End Position defined by the user so that the drill diameter at the Drill End Position will be equal to the diameter value of the chamfer defined by the user.