S-Frame

Your Ad Here

To create a new load case

1. Click the New Load Case icon ( ) from the Views and Grids toolbar or click Edit / New Load Case...

2. Enter the Load Case Description that you want to use.

3. If you want to calculate the self-weight of the elements within your frame, then you can set the Gravitational Factors for the appropriate directions. If you set a value, then S-Frame will calculate the self-weight as a uniform load on each element based on its area and the density of the material from which it is made. If you enter a value of 1, then S-Frame will use 100% of the calculated weight acting in the direction of that global axis (this means that for actual self-weights you are likely to enter a value of -1 in the Y-axis direction). If you want to apply 30% of the calculated load, then you would enter a value of 0.3.

4. The Scale factor allows you to factor all the loads in the load case by a certain amount. For example if you enter a Scale of 1.00, S-Frame uses the loads as you have defined them. If you enter a Scale of 1.5, S-Frame applies loads which are 150% of those that you have applied.

5. Once your settings are correct click Ok to close the dialog and create the load case.

Softek Web site Softek Offices

This help system is best viewed using the Verdana and Comic Sans fonts which are available from the Microsoft Typography Web site