Drawing Borders and Limits  

You can change the border values by opening a standard and double clicking on the Borders icon.

To edit the borders and limits used…

1.       Open the standard where you want to edit the border.

2.       In the Standard Manager window, click the Borders icon. 

The Borders Settings dialog box opens. It displays all paper sizes, the corresponding border drawing and two limits fields.

To assign border block drawing files…

1.       Ensure that the border drawing files are correct.

Ø      Important: You must save the border drawing files in the same folder you select for the border file.

To choose a different file, click the Select Border File icon and the Select Border Drawing File dialog box will appear.

2.       Select the appropriate file and do one of the following:

• Click Open to insert the selected border file and close the dialog box.

• Click Cancel to close the dialog box without saving the changes.

Ø      Note: Do not browse to a different folder to select a border.

1.  In the Borders dialog box, ensure the limit values for each paper size are correct. To change limit values, select the data in the cell, then type in a new value.

Ø      Important: The system does not validate data entered in these cells. Ensure you enter the correct numerical value.

 2.  When all limits information is complete, do one of the following:

§         Click Apply to save your changes, and keep the dialog box open.

§         Click the Close button  to exit the dialog box without saving changes.