Component Sizing Dialog Box

Flanged Valves Length

The length of the flanged valves in the drawing will be the size defined in this value multiplied by the Component Scale Factor on the Scale Factors dialog box.

Flanged Valves Height

The height of the flanged valves in the drawing will be the size defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

THRD and SW Valves Length

The length of the small bore valves in the drawing will be the size defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

THRD and SW Valves Height

The height of the small bore valves in the drawing will be the size defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

Check Valves Arrow Length

The length of the check valves in the drawing will be the size of the original check valve multiplied by the scale factor defined in this parameter.  The original length of the check valve is 1”.

Check Valves Arrow Width

The height of the check valve in the drawing will be the size of the original check valve multiplied by the scale factor defined in this parameter.  The original width of the check valve is 0.5”.

Socket Weld Extension Line

The distance of the socket weld extension line in the drawing will be the size defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

Flange Weld Point to Face Length

The length of the flange symbol from the centre of the weld dot to the centre of the flange face.

Face of Flange Width

The width of the face of flange for the flange symbol.

BW Fitting Polyline Width

The thickness of all polylines created when butt weld fittings are placed.

THRD/SW Fitting Polyline Width

The thickness of all polylines created when threaded or socket weld fittings are placed.

Revision Cloud Line Thickness

The thickness of the polyline created when the Revision Cloud routine is used.

Weld Dot Scale

The size of the weld dot will be the size of the original weld dot symbol multiplied by the scale factor defined in this parameter.  This symbol is found in weld-dot.dwg and has a diameter of 1”.

BW Components Length

The larger dimension of butt welded fittings such as the end to end length of the main run of a tee or the end to end dimension of a 180 degree return..

BW Components Height

The dimension of butt welded fittings such as the centre to end dimension for an elbow, the length of the branch of a tee, or the height of a reducer.

THRD and SW Components Length

The larger dimension of threaded and socket weld fittings such as the end to end length of the main run of a tee or the length of a pipe nipple.

THRD and SW Components Height

The smaller dimension of threaded and socket weld fittings such as the centre to end dimension for an elbow or the length of the branch of a tee.

Scaling Factor for Pipe Insulation Symbol

The height of the pipe insulation symbol and the size of the text will be the dimensions from the original block multiplied by this scale factor.  The original pipe insulation block may be found in ins*.dwg.

Break Distance for Pipe Insulation Symbol

The length of the pipe insulation from one side of the pipe break to the other side of the pipe break.

Gasket Gap Between Flanges and Valves

The gasket gap in the drawing will be the size defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

Steel Member Height

For wide flanges and channels, the height of the steel member in the drawing will be the height defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

Steel Member Width

For wide flanges and channels, the width of the steel member in the drawing will be the height defined in this parameter multiplied by the Component Scale Factor on the Scale Factors dialog box.

Base Support Width

The width of the base support in the drawing will be the width defined in this parameter.

Click to apply the changes.

Click to access the Help dialog box.