Welded / Flanged

ANSI Rating

Use the drop-down list to select the default rating of valves and flange
 Note: If required, this rating can be changed while drafting.

Flange Face

Use the drop-down list to select the default flange type
 Note: The system adds the valve face to the description of the valve before placing it in the drawing.

Bolt Type

Use the drop-down list to select the default bolt type

Gasket Thickness

Use the drop-down list to select the default gasket thickness
 Note: If you select OTHER, the system asks for gasket thickness each time a gasket is placed.

WOL/EOL Rating

Use the drop-down list to select the weldolet (WOL) or welded elbolet (EOL) rating

Lap Joint Flange

Use the drop-down list to select the lap joint flange rating

Apply

Click to save current spec parameter information and close the dialog box

Help

Click to view context sensitive Help for this dialog box

Ball Valve Type

Use the drop-down list to select the default type of ball valve
 Note:  If you select ALL, the system asks for type each time you place a ball valve.

Note:  This setting applies to flanged and welded valves only. It does not effect screwed or socket weld valves.

Note: You can override the default selection during a drafting session.

Ball Valve Descriptions

Change the text that is appended to the ball valve's description for use in the Bill of Material.

The default values are:

• FP for full port ball valves

• RP for reduced port ball valves

• VENTURI for Venturi ball valves

Plug Valve Type

Use the drop-down list to select the default type of plug valve
 Note:  If you select ALL, the system asks for type each time you place a plug valve.

Note:  This setting applies to flanged and welded valves only. It does not effect screwed or socket weld valves.

Note: You can override the default selection during a drafting session.

Plug Valve Descriptions

Change the text that is appended to the plug valve's description for use in the Bill of Material.

The default values are:

• REG PATTERN for regular pattern plug valves

• SHORT PATTERN for short pattern plug valves

• VENTURI PATTERN for Venturi pattern plug valves

Check Valve Type

Use the drop-down list to select the default type of check valve
 Note:  If you select ALL, the system asks for type each time you place a check valve.

Note:  This setting applies to flanged and welded valves only. It does not effect screwed or socket weld valves.

Note: You can override the default selection during a drafting session.

Check Valve Description

Change the text that is appended to the check valve's description for use in the Bill of Material.

• PISTON for piston check valves

• SWING for swing check valves

• WAFER for wafer check valves