www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007
1. From the Civil Drafting tab, select Dike.
The Dike dialog box appears.
2. In this dialog box, do the following.
|
In this… |
Do this… |
|
Orientation options |
Select Elevation. |
|
Insertion Point X and Y input boxes |
Type coordinate values, or click Digitize and click in the drawing to set the insertion point |
|
Length of Dike input box |
Type a length value, or click Digitize and click in the drawing to set the length |
|
Direction of Dike input box |
Type a degree value, or click Digitize and click in the drawing to set the direction |
|
Width of Dike input box |
Type the dike width value, or click Digitize and click in the drawing to set the width |
|
Height of Dike input box |
Type the dike height value, or click Digitize and click in the drawing to set the height |
|
Top of Dike Width input box |
Type the top width value, or click Digitize and click in the drawing to set the top width |
3. Click Draw Dike.
The dike appears in the drawing.
Copyright © 2006 - PROCAD Software. All Rights Reserved