Inserting Flange, Gasket, and Bolts

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

If the Gasket Thickness Override is active when you insert a flange, gasket and bolts, a dialog box prompts you to accept the current gasket thickness or type a new value. See Gasket Thickness Override for details.

If the Bolt Length Override is active, a dialog box prompts you to accept the current bolt length or type a new value. See Bolt Length Override.

To insert a flange, gasket, and bolts…

1.   From the Flanges tab, select Flange, Gasket and Bolts.

The Flange Insertion Point dialog box appears.

2.   From the options, select the required insertion point.

3.   Click OK.

4.   In the drawing, click to select the insertion point.

5.   Click to select the direction.

The flange, gasket and bolts appear in the drawing.