Inserting Doors in Plan View

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

To insert doors in plan view, first draw a building outline or two lines that define the inside and outside walls.

To insert single a door in plan view…

1.   From the Civil Drafting tab, select Door.

The Door dialog box appears.

2.   From the Orientation options, select Plan View.

3.   From the Door Type options, select Single or Double.

4.   Click Draw Door.

The AutoORTHO Message box appears, instructing you to pick the outside corner of the building. Click OK.

5.   In the drawing, click the outside corner of the building closest to where you want to insert the door.

For single doors, the Door-Distance to Hinge End dialog box appears.

For double doors, the Door-Distance to Center of Doors dialog box appears.

6.   In the Door dialog box, do one of the following:

• Type the distance from the corner of the building to the door hinge (or center of doors) and click OK

• Click Digitize and click in the drawing to set the distance value

7.   In the drawing, click the outside outline of the building.

8.   Click the inside outline of the building.

For single doors, the Door-Width dialog box appears.

For double doors, the Door-Width of Both Doors dialog box appears.

9.   In the Door dialog box, do one of the following:

• Accept the default door width

• Type a new door width value

10. Click OK.

The door appears in the drawing.