Expansion Joints

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

To insert an expansion joint…

1.   From the Miscellaneous Fittings tab, select Expansion Joint.

2.   In the drawing, click where you want to insert the start point.

3.   Click to select direction.

The Expansion Joint Length dialog box appears.

4.   Choose one of the following options:

• In the input box, type the expansion joint length value

• Click Digitize and click in the drawing to set the joint length

5.   Click OK.

The Expansion Joint Description dialog box appears.

6.   Choose one of the following options:

• In the Description box, accept the default description

• Type a new description

7.   Click OK.

The expansion joint appears in the drawing.