Selecting a Pipe Spec

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

You can select a pipe spec using either of the following:

§         Toolbox drop-down list

§         Select Spec dialog box

To select a pipe spec using the Toolbox drop-down list…

1.   On the Toolbox, click the arrow on the Spec drop-down list box.

A list of pipe specs appears.

2.   In the list, click the required spec.

To select the pipe spec using a dialog box…

1.   From the Settings tab, select Pipe Specs.

The Select Spec dialog box appears.

The current spec selection appears at the top.

2.   In the list, click the spec you want to use.

3.   Choose one of the following:

• Click OK to set the spec and return to the drawing

• Click Cancel to exit without changing the pipe spec