Reducers

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

Select the correct isoplane settings before inserting reducers.

After you insert a reducer, AutoISO switches the pipe size to the branch pipe size.

To insert a reducer…

1.   From the Fittings tab, select Eccentric or Concentric Reducer.
 or

The Confirm Fitting Size dialog box appears.

2.   From the scroll lists, select new inlet and outlet pipe sizes if required.

3.   Click OK.

4.   In the drawing, click to select the first end weld point.

5.   Click to select the direction.

6.   If placing an eccentric reducer, click to select the flat side.

The reducer appears in the drawing.

Ø      Notes: The system prints the offset value for eccentric reducers above the fitting.