Mitered Elbows

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

Mitered elbows are not restricted by the current isoplane and you can insert them in any orientation.

To insert a mitered elbow…

1.   From the Fittings tab, select Mitered Elbow.

The Miter Elbow dialog box appears.

2.   From the options, select the number of welds required.

3.   Click OK.

4.   In the drawing, click to select the weld (or center) insertion point.

5.   Click to select the main direction.

6.   Click to select the side direction.

The elbow appears in the drawing.