Inserting General Valves

www.kxcad.net Home > ProCAD Index > ProCAD 2D DESIGNER 2007

Select the correct isoplane setting before inserting valves.

Use this procedure to insert the following valves:

§         Flanged

§         Welded

§         Screwed

§         Socket Welded

To insert a valve…

1.   From the Valves tab, select a valve type.

2.   In the drawing, click to select the insertion point.

3.   Click to select the direction.

The valve appears in the drawing.

If the Valve Stem toggle is active, the Add Stem? dialog box appears (see Inserting Valve Stems).

Ø      Note: Socket weld valves symbols appear with socket extensions on both sides of the valve.