Inserting Flange, Gasket, and Bolts

1. From the Flanges tab, select Flange, Gasket and Bolts.

The Flange Insertion Point dialog box appears.

2. From the options, select the required insertion point.

3. Click OK.

4. In the drawing, click to select the insertion point.

5. Click to select the direction.

The flange, gasket and bolts appear in the drawing.

Ø Notes: When AutoISO inserts the gasket, it creates a spacer between flanges to indicate the presence of a gasket.

Ø AutoISO inserts the gasket spacer the DEFPOINTS layer, which AutoCAD does not plot.